We have repeatedly received inquiries about what to look out for when interference suppressing smartphones and where exactly the BioPatch should be applied.

This page is intended to provide answers. If you still have any questions, please contact us. You will find our contact details at the bottom of the page.

Tablet computers also require interference suppression, i.e. the application of a BioPatch, because tablets often lie directly against the body and therefore come into direct contact with cells.

If the tablet is connected by a charging cable to a socket in a house harmonized by Swiss Harmony, then it is naturally interference-free and no longer dangerous to health.

But without this direct connection to the harmonic oscillation spectrum, smartphones and tablets, as well as simple cell phones and cordless phones, generate their own electrosmog, which can have too direct an effect on the brain cells. Additional harmonization through the BioPatch is therefore required here.

The positioning of the BioPatch on smartphones:

Most smartphones have a removable plastic back. The BioPatch must be placed in the device. The most sensible position is under the battery.

See figure 1.

But of course you can also simply place it on top. (see Figure 2)

Here, as in all other installation situations, it makes no difference which side of the BioPatch is facing upwards.

For smartphones that cannot be opened, we recommend using a protective cover and placing the BioPatch in the protective cover. In these cases, the BioPatch does not necessarily have to be stuck to the back of the smartphone because it is well secured by the protective cover.

If you are not using a protective cover, you can either stick the BioPatch to the back with the Hafty supplied or simply with Sellotape.

The two surfaces of the Hafty are made of nano suction cups, making it suitable for unlimited use in other areas of application for the BioPatch. With its thickness of 1 mm, it is not really suitable for attachment to a cell phone for our taste.

Be careful with smartphones and tablets with aluminum backs!

Aluminum has insulating properties and does not let any information through. In our opinion, the most diverse products for protection against electrosmog are ineffective if their base is made of aluminum.

Probably the most common smartphone with an aluminum back is the iPhone from version 5.

However, to ensure that the smartphone’s many built-in antennas and sensors can also transmit and receive, it has either entire glass or plastic end pieces or narrow plastic strips on the top and bottom of the back. These are the areas where the BioPatch can be applied effectively.

Figure 3 shows this using the iPhone 6 plus as an example.

Since the apple itself is not made of aluminum, the BioPatch could also be placed over the apple.

Figure 4 shows correct and incorrect positioning using the iPad as an example. We have also used the back of the BioPatch for this illustration to make it clear that it does not matter which side is facing up.

 

Do simple cell phones and cordless phones also need a BioPatch?

No, this is not necessary because cordless phones only work with one frequency and simple cell phones have a much lower radiation variety and strength than modern smartphones.

It should also be mentioned here that cordless telephones in a harmonized household (Swiss Harmony) are completely interference-free as long as they are in their base station. Only when they are taken out to make a phone call do they develop their own independent energy system and thus become a threat to our health.

Only a local interference suppression of the handset will help and here it is completely sufficient to use our PhoneCard.