Application description of the MiniTuner Climate

The BioTuner Klima XXS (MiniTuner Klima) is ideal for harmonizing smaller areas such as bedrooms and workplaces. It is therefore ideally suited for local interference suppression of all types of electrosmog, especially high-frequency radiation from cordless phones, cell phones (cell phones), cell towers and WiFi.

1. Ensure that there are lamps or other electrical loads in the area concerned if possible.
2. Make sure that, if possible, all these consumers receive their power from a single power strip, the cable of which in turn leads into a wall socket.
3. Remove the aluminum protective foil from the MiniTuner Klima.

• Use the enclosed cable ties to attach the MiniTuner Klima to any point on the cable leading from the power strip to the wall socket. (see Fig. 1)
• Make sure that there are no other cables connected to the socket strip within a radius of around thirty centimeters. This is the only way to avoid unwanted interference that could reduce or completely cancel out the effect of the MiniTuner Climate.

If it is unavoidable that such cables are within the operating range of the MiniTuner Klima, wrap it in aluminum foil together with the cable to which you have attached it. (see Fig. 3)

• Make sure that the film is folded on both sides by folding the shiny side against each other. (see Fig. 2)
• For further protection, you can wrap the whole thing again with a wide insulating tape, as aluminum foil is easily damaged. (see Fig. 4)